How To Put Up Window Blinds

Download Article

Download Article

Installing a roller blind in a window is really easy. Withal, in society to do it correctly yous must be certain that the roller blind fits correctly. To practice this yous volition need to determine where you want the blind, measure the space, cut the blind, and install it into the window.

1. i

   Decide the placement of the blind. Although roller blinds are typically installed inside of the window frame, it can besides sit down outside of the window frame or above the window. The location of the blind is personal preference. Make sure that you determine where y'all would like to install the blind earlier buying the blind.^[i]

   • Concur the blind up to the window to visually run into where yous would like to secure the brackets.
   • Utilise a pencil to marker where y'all want to blind to exist secured.

2. 2

   Mensurate the infinite. Employ a tape measure to measure the altitude of the space that you would like to bullheaded to be secured. Measure horizontally from i bespeak to the other point.^[ii]

   Advert

3. three

   Buy a roller bullheaded. One time yous have adamant the measurement of the infinite, you tin purchase your blind. Purchase the blind that best fits the infinite that you have measured. If information technology is not exact, opt for a larger blind. The blind can ever be cut to fit the space.

   • About roller blinds can be purchased at a home comeback shop.

   Advertisement

1. 1

   Make up one's mind on the placement of the chain. Evaluate the infinite and determine which side of the bullheaded you would similar the chain to hang down. Almost roller blinds let you to alter the side that the chain hangs on.^[3]

   • For example, if you have a chair to the left of the window, yous may decide to hang the chain on the left for easier access.

2. 2

   Decide which way yous want the bullheaded to curl. The bullheaded can either curlicue nether or over the roller. Typically, the blind is positioned then that it rolls under the roller. However, if you take objects that protrude from the window, you may decide to roll the blind over the roller. This manner, the bullheaded volition not be obstructed when it is pulled down over the window.^[4]

3. 3

   Secure the brackets. Using a hand drill, secure the brackets that came with the roller blind. Make sure that the brackets are screwed in tightly to prevent the bullheaded from falling.^[5]

   • Follow the instruction manual that come with your blinds. Every roller bullheaded is slightly different.

   Advertizement

1. ane

   Cutting the blind to fit the space. If y'all blind is also large for the window, you will need to cutting it to fit the space. Remove the blind from the roller. Measure the corporeality of blind that you demand to remove. Draw a line all the fashion up the blind's fabric with a pencil. Cut vertically up the cloth. Reattach the fabric to the roller.^{[half dozen]}

   • Measure out the space one more than time to verify the measurements before making whatever cuts to the blind.
   • When securing the textile back on the roller, it is important to make sure that the fabric is secured perfectly horizontally. If not, the cloth volition not whorl correctly on the roller.

2. 2

   Hang the blind on the brackets. Wedge the blind into the brackets that you have already secured. Brand sure that you are following the instructions that are provided with your roller blind to ensure proper installation.

3. 3

   Attach the chain to the wall. Secure the chain to the wall with the screws provided. Use a hand drill for best results.

   • Some chains hang loosely beside of the blind. If this is the case, practise not worry most securing the chain.

   Ad

Add together New Question

• Question

  How do I shorten the length or driblet of the blind which is fastened to the elevation of the pole with glutinous adhesive?

  

  Pull the sticky adhesive away from the bullheaded fabric as advisedly as possible and place on the edge of your new length. Cut away any length you don't want at the elevation of the agglutinative. A couple of staples give it extra strength.

• Question

  How can I untangle the blind leads?

  

  There should be a plastic piece that keeps the beads connected along the chain. Pry it open gently with a knife, try not to interruption it. Once it's open you tin can take the beads out, untangle, and refit.

• Question

  Can I drill the bracket mounting holes at an angle?

  

  Eriko Angelo Flores

  Community Answer

  No. The screw head will not be flush with the bracket, and the screw should support the weight of the blinds perpendicularly.

• Question

  How do I finish a roller blind on the door from flapping when opening doors?

  

  The blinds we take on our french doors have a magnetic bottom that catches on magnetic stays installed into the bottom of the door. This keeps the blind bottoms from swaying when opening and closing the doors.

• Question

  How do I rewind a blind that's dropped down?

  

  Take the finish of it (the end that has a woodstick within) and pull that up and over the roll and down the back (it may be a bit tight against the wall). That should piece of work!

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

Video

• Read the pedagogy manual that comes with the blind for proper installation.

• Measure out the space several times before purchasing or cutting the blind.

Cheers for submitting a tip for review!

Advert

• Always use caution when using power tools.

Advertisement

Things You'll Demand

• Measuring tape
• Pencil
• Hand drill
• Scissors
• Roller blind
• Screws
• Brackets

About This Article

Article Summary X

To fit a roller blind, first use a record measure out to measure horizontally from i cease of the window to the other to ensure you have the right size blind. Once yous've bought a roller blind, employ a hand drill to secure the brackets that come up with it. Place one on each side at the top of the window frame. When you're prepare to hang the roller bullheaded, simply wedge the ends into the brackets you've put upwards. Then, screw the blind chain to the wall with the screws provided. If your bullheaded is as well broad to fit your window, remove it from the roller and trim information technology earlier returning it to the roller. To larn how to decide whether to hang your bullheaded roller over or nether, read on!

Did this summary aid you?

Thanks to all authors for creating a folio that has been read 255,997 times.

Did this article help you?

Source: https://www.wikihow.com/Fit-a-Roller-Blind

Posted by: hairstonvervang.blogspot.com

Share this post